Stainless steel
Surface Finished Stainless Sheet
HL (brushed), No.4, mirror 8K and embossed sheet in 304 / 316L — 0.3–3 mm, with film protection.
0.3–3 mmThickness
≤ 1500 mmWidth
Available specification
| Grades | Thickness | Width / diameter | Standard |
|---|---|---|---|
| 304 · 316L · 430 | 0.3–3 mm | ≤ 1500 mm | ASTM A240 / EN 10088-2 |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2.
Typical applications
- Elevator doors and cabin panels
- Appliance front panels
- Decorative wall cladding
Delivery and inspection
- Grain direction stated on the order — mismatched panels read as two colours under light
- 8K polished from a higher surface class substrate, not from ordinary 2B
- Laser film (PVC or PE) applied on the visible face
Need a quote or technical support?
Send the grade, size, quantity and destination port — we reply with FOB / CIF within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- 8K mirror — elevator cars and doors, decorative columns, retail façades
- Embossed — fridge doors, security doors, ceiling panels
- Brushed (HL / No.4) — appliance panels, cookware, handrails, elevator frames
- Signage and display — sign boards, exhibition walls
- Hygiene-critical — hospital walls, kitchen splashbacks (brushed hides fingerprints better)
Selection FAQ
- Does mirror finish scratch easily?
- Yes. An 8K surface hides almost nothing; keep the protective film on through transport and installation, peel it at the end.
- Brushed or mirror for elevators?
- Car interiors usually brushed (fingerprint and scuff resistant); doors and trim are often mirror, depending on the design.
Not sure which grade fits? Use the grade selector