Processing
Processing Capabilities
Slitting, decoiling, laser and waterjet cutting, CNC bending, punching and circle blanking — from coil and plate to parts ready for your line.
8 mmMin. slit width
±0.1 mmLaser tolerance
80 mmMax. plate cut
Six Operations, One Supply Chain
| Operation | Range | Tolerance / Note |
|---|---|---|
| Slitting | width 8–1500 mm, 0.3–3 mm | burr ≤ 0.05 mm on request; trim loss quoted honestly (3–5% below 100 mm) |
| Decoiling / cut-to-length | length up to 6000 mm | squareness within 1 mm per metre |
| Laser cutting | 0.3–20 mm | ±0.1 mm, edge quality per ISO 9013 |
| Waterjet cutting | 0.5–80 mm | ±0.2 mm, no heat-affected zone — preferred for duplex |
| CNC bending / punching | up to 4000 mm | bend angle ±0.5°, tooling per drawing |
| Circle blanking | Ø100–3000 mm | burr-free, nesting optimised to your blank size |
What You Need to Send
- DXF or DWGfor cut parts — PDF is accepted but we will quote against a redrawn profile.
- Grade, thickness and surface; if you are unsure, tell us the service condition and we will propose one.
- Quantity and destination port— this decides packing (crate, pallet, or bundle) and freight.
We quote cutting cost separately from material, so you can compare "buy sheet and cut locally" against "buy finished parts" with real numbers.
Need a Quote on Cut Parts?
Send the drawing, grade, quantity and destination port — we reply within 24 hours.