Processing
Edge bevelling
Machined bevels on medium plate for welding preparation, 6–80 mm with angle and root face to your WPS.
Range and tolerance
| Item | Value |
|---|---|
| Thickness | 6–80 mm |
| Bevel angle | per drawing (typ. 30° / 37.5°) |
| Root face | per WPS |
| Surface | machined, ready for welding |
Typical use
- Pressure vessel shell joints
- Tank and silo circumferential seams
- Heavy structural butt welds
Send the WPS or the joint detail. Bevel geometry that does not match the welding procedure is the usual reason a fit-up fails on site.
Need a quote for this operation?
Send the size, quantity and destination port — we reply with FOB / CIF within 24 hours.