Stainless steel
Cold Rolled Stainless Sheet
2B and BA cold rolled sheet in 304 / 316L / 430 / 201 — 0.3–3 mm, cut to length up to 3000 mm.
0.3–3 mmThickness
≤ 1500 mmWidth
Available specification
| Grades | Thickness | Width / diameter | Standard |
|---|---|---|---|
| 304 · 316L · 430 · 201 | 0.3–3 mm | ≤ 1500 mm | ASTM A240 / EN 10088-2 |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2.
Typical applications
- Kitchen equipment and worktops
- Electrical enclosures
- General fabrication from sheet
Delivery and inspection
- Cut-to-length with squareness within 1 mm per metre
- Protective film on one or both faces
- Tolerance to ASTM A480 / EN 10088-2
Need a quote or technical support?
Send the grade, size, quantity and destination port — we reply with FOB / CIF within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Sheet metal enclosures — control cabinets, distribution boxes, instrument housings
- Appliance panels — fridge sides, air conditioner shells, hood panels
- Architecture — elevator interiors, ceilings, decorative trims
- Medical and laboratory — worktops, instrument carts, cleanroom doors
- Laser cutting — flat parts cut straight from sheet
Selection FAQ
- How flat is the sheet?
- Supplied to ASTM A480 / EN 10088-2 flatness; after decoiling the bow is within the standard tolerance. Tighter classes can be specified.
- Can it be supplied with protective film?
- Yes — PVC or laser film, one or both faces, black-and-white or transparent.
Not sure which grade fits? Use the grade selector