9 月 28 日至 10 月 6 日，热轧产线按计划停机检修，完成加热炉耐材更换、除鳞系统改造与轧机牌坊精度校准。
10 月 7 日全线试车一次通过，首卷热轧卷表面质量与厚度公差均在设计范围内。检修期间已提前备库，未对客户订单造成影响。
- 热轧卷：参考交期 25 天
- 中厚板：参考交期 28 天
- 冷轧基料：参考交期 20 天
以上为常规规格的参考值，实际交期以订单确认与当期排产为准；节假日与港口拥堵会顺延。如需锁定 11 月产能，建议提前 30 天下达采购意向。
公司新闻 · 2026-10-09
热轧产线完成年度检修，交期已恢复正常
产线复产后常规规格备货充足；常规规格参考交期 20–30 天，具体以订单确认与排产为准。
Related Articles
行业资讯
2026-10-31
Laser Cutting 316L Dross: How to Match Nitrogen Pressure, Focus, and Speed
316L must be cut with nitrogen, not oxygen — but switching to nitrogen makes dross problems more common. Dross comes in two types, 'soft dross' and 'hard dross,' and the adjustment directions are exactly opposite.
View More News
行业资讯
2026-10-31
Stainless Steel Bending Springback: How to Set V-Groove, R/t and Rolling Direction
Stainless steel has much greater springback than carbon steel, so bending to carbon steel parameters will always give the wrong angle. Of the four variables affecting springback, two can be fixed at the time of order.
View More News
行业资讯
2026-10-31
Rust Spots on Stainless Steel Coils After Ocean Shipping: Three Causes and Packaging Countermeasures
The idea that "the more expensive the steel, the more likely it rusts" inside a container is not an illusion: drastic temperature and humidity swings at sea cause condensation, and the condensation water carries chloride ions. Most rust spots found on arrival are not a material problem but a packaging and container-loading problem.
View More NewsNeed a quote or samples?Provide material, thickness, width and quantity, and we will reply within 24 hours.
Contact Us
Related products and next step
One email a month: grade selection and market notes
The articles like this one, collected into a single email, with nickel price and lead-time movement. No blasts, unsubscribe anytime.