Processing
Decoiling and levelling
Cut-to-length lines up to 6000 mm, with flatness held to 1 mm per metre.
Range and tolerance
| Item | Value |
|---|---|
| Length | up to 6000 mm |
| Thickness | 0.3–12 mm |
| Flatness | ≤ 1 mm per metre |
| Squareness | ≤ 1 mm per metre |
Typical use
- Sheet for single-part fabrication
- Blanks for stamping
- Cut-to-length instead of buying coil
Decoiling adds 0.5–1% head/tail loss per coil. On urgent orders, "coil plus local levelling" is often faster than waiting for cut sheet — we will say so when it is true.
Need a quote for this operation?
Send the size, quantity and destination port — we reply with FOB / CIF within 24 hours.